EPSON Stylus COLOR 900/900N
9. Press Enter. A new test pattern prints, but the page remains in the
printer.
C A U T I O N
Do not press the Load/Eject button to eject the test
pattern. If you do so, an internal error occurs, causing
the carriage to thrash about and make loud chattering
noises.
Note that the page automatically ejects after you print
the test pattern five times. If you need to eject it
sooner, select End as shown in
After the new test pattern prints, the re-adjustment menu appears:
Figure 5-22. Re-Adjustment Menu
Figure 5-22
below.
10. Select Re-Adjustment. Adjustment instructions appear on screen.
Figure 5-23. Adjustment Instructions
11. Follow the instructions on screen and loosen the screws as before.
Then move the adjustment lever down one notch from the center
mark, toward the front of the printer. The correct adjustment position
is most likely to be found when you move the lever in this direction.
Figure 5-24. Moving the Adjustment Lever
Chapter 5 Adjustments
135