Epson Stylus COLOR 900 Service Manual page 126

EPSON Stylus COLOR 900/900N
4. Press Enter to select Stylus COLOR 900 as your printer's model
name.
NOTE: Other model names may be added in the future. In that
case, use the Up and Down arrow keys to highlight the
desired model name, and then press Enter to select it.
After entering your printer's model name, you see the destination
menu:
Figure 5-2. Destination Menu
5. Select your printer's destination (such as "EAI" for Epson America),
and then press Enter.
In about 5 seconds, the startup menu appears:
Table 5-2. Startup Menu
6. Do one of the following:
T
If you selected the correct model name and destination, select
Perform (Boot this PROGRAM). The main adjustment menu
appears, as shown in Figure 5-3
T
If you selected the wrong model number or destination, select
No (Re-select the model name). This lets you re-enter the
correct model name and destination.
T
If you need to verify that the model name is correctly stored in
the printer's EEPROM, select Get (Check this model name). It
takes about 25-30 seconds to read the data.
Chapter 5 Adjustments
below.
123