Epson Stylus COLOR 900 Service Manual page 110

EPSON Stylus COLOR 900/900N
C H E C K
When installing the roller assemblies, note that
P O I N T
the white one goes on the left and the black one
goes on the right.
Also, make sure that the groove on the back of
each roller assembly mates with the ASF frame
rib as shown below:
Roller
Assembly
Figure 4-31. Roller Assembly Installation
Rib
Chapter 4 Disassembly and Assembly
C H E C K
Make sure the left edge of the roller assembly
P O I N T
fits into the slot in the paper guide.
Figure 4-32. Assembling the ASF
Paper Guide (blue)
Left edge of Roller Assembly
107