Operating Examples - Siemens SIPART DR19 Quick Reference

Operating and Monitoring
2.1

Operating Examples

The indicator SP-W (2) is to be switched from setpoint w to manipulated value y.
Example 1: SP-
W indicator
Method
SP-W
OUT-Y
setpoint w (2)
permanent light
+
NOTE
This example reflects the factory setting - other values may be displayed (con-
figuring switches S87 and S88).
The setpoint w on the front panel ( internal setpoint) is to be modified.
Example 2:
modification
of w
IF w is displayed,
Method
SP-W
OUT-Y
setpoint w (2)
permanent light
+
NOTE
The setpoint cannot be modified in, for example, manual mode with setpoint
tracking (x tracking), external mode on slave controller (S1) ect.or
IF y is displayed,
SP-W
OUT-Y
actuating value y (2)
52
Press
button (6)
1x
SP-W
x
w
OUT-Y
actuating value y (2)
Press
button (6)
1x
AND the controller is in
internal mode
x
(15)
w
THEN w cannot be modified
x
w
Quick Reference
x
w
THEN w can be modified
(7) (8)
(7) (8)
SIPART DR19
C73000-B7474-C140-06