Overland Storage Snapshot SnapSAN User Manual page 90

SnapSAN S3000/S5000 Snapshot User Guide
BV Logical Disk Name
Displays the logical disk name of the base-volume.
Status
Displays the snapshot status of the base-volume
Capacity [GB]
Displays the capacity of the logical disk.
Partition Name
Displays the name of partition to which the base-volume belongs. This column is not
displayed for disk arrays for which VirtualStoragePartitioning has not been purchased.
SV Pool Number
Displays the number of the pool to which the snapshot-volume set in the base-volume
belongs in hexadecimal.
SV Pool Name
Displays the name of the pool to which the snapshot-volume set in the base-volume belongs.
SV PD Type
Displays the physical disk type configuring the pool to which the snapshot-volume set in the
base-volume belongs.
10400422-002 02/2013
Display Description
AX Indicates the logical disk is operating on an AIX system.
CX Indicates the logical disk is operating on a Solaris system.
LX Indicates the logical disk is operating on a Linux system.
NX Indicates the logical disk is operating on an HP-UX system.
SX Indicates the logical disk is operating on a SUPER-UX system.
WN Indicates the logical disk is operating on a Windows system
(excluding GPT disk).
WG Indicates the logical disk is operating on a Windows system (GPT
disk).
Display Description
Indicates a state other than below.
Normal
Indicates the state that data is being restored from snapshot-
Restoring
volume to base-volume.
Indicates the restore fault state.
Restore fault
Indicates the snapshot fault state.
SV fault
©2013 Overland Storage, Inc.
 5-10