Overland Storage Snapshot SnapSAN User Manual page 247

SnapSAN S3000/S5000 Compliance (WORM) User Guide
Condition for ending the waiting (-cond)
Specify the condition for ending the waiting.
• Snapshot-active (-cond active)
The system waits for the snapshot-active state (snap/active).
Monitoring Interval of Snapshot Status (-interval [second])
Specify the interval for monitoring the snapshot status in seconds.
The value (the number of seconds) specified in second indicates the monitoring
interval.
1 to 30 seconds (integer number) can be specified.
The default value can be specified by SNAP_WATCHDEV in the operation option
setting file for Windows and environment variable SNAP_WATCHDEV for UNIX.
Monitoring tIme Limit of Snapshot State (-limit)
Specify the monitoring time limit for monitoring the snapshot state in seconds. If the
waiting does not complete before the specified time has elapsed since the waiting start
time, the waiting is terminated abnormally.
• Specification of time (-limit [second])
The value (the number of seconds) specified in second indicates the monitoring limit
time. 0 to 86400 seconds (integer number) can be specified.
• No limit (-limit nolim)
The waiting is performed unlimitedly.
The default value can be specified by SNAP_LIMWATCHDEV in the operation option
setting file for Windows and environment variable SNAP_LIMWATCHDEV for UNIX.
10400422-002 02/2013
©2013 Overland Storage, Inc.
 6-48