Overland Storage Snapshot SnapSAN User Manual page 162

SnapSAN S3000/S5000 Snapshot User Guide
The processing dialog displays information of the snapshot-volume currently during
processing.
Clicking the [Cancel] button displays the following dialog. On this dialog, you can stop
deleting snapshots and return to the snapshot management screen to perform another
operation. The state of a selected snapshot can be checked with the information list display
area on the snapshot management screen.
[Execution Conditions]
To execute the snapshot deletion operation, the following conditions must be satisfied.
• The target snapshot-volume is in the active state.
• The target snapshot-volume is not guarded.
• The target snapshot-volume is not connected to a link-volume.
• The target base-volume is not being restored.
• No other snapshot-volume set in the target base-volume is being deleted.
• The disk array is being monitored.
• The disk array is not in the freeze state.
• If the target base-volume is also used as MV, the synchronous state of the pair is not
Separate Preparing or Sync Preparing.
• The state of the target base-volume is not snapshot fault.
10400422-002 02/2013
Figure 5-81: Processing
Figure 5-82: Deletion Cancelled
©2013 Overland Storage, Inc.
 5-82