Connecting To Mains Power - ResMed Astral Series Clinical Manual

Power management

Connecting to mains power

WARNING
Ensure that the power cord does not pose a tripping or choking hazard.
To connect to mains power:
1. Connect the DC plug of the supplied ResMed external power supply unit to the rear of the Astral
device.
2. Before connecting the power cord to the ResMed power supply unit, ensure the end of the
connector of the power cord is correctly aligned with the input socket on the power supply unit.
3. Plug the other end of the power cord into the power outlet.
Note: The power cord is equipped with a push-pull locking connector. To remove, grasp the power cord housing and
gently pull the connector from the device. Do not twist its outer housing or pull on the cord.
60