Using The Setup Assistant - ResMed Astral Series Clinical Manual

Using the Astral device
To exit Clinical mode:
1. Press . The Exit Clinical Mode screen is displayed.
2. Press Confirm. The padlock is locked and the Patient Home screen is displayed.
Note: If you do not make a selection within 7 seconds, the device returns to the previous screen.

Using the Setup Assistant

To quickly set up the Astral device and start ventilation, use the Setup Assistant.
The Setup Assistant guides you through the process of setting up the device for use by a new patient.
The Setup Assistant prompts you to assemble components and automates testing of the circuit. For
detailed instructions on assembling patient circuits, and other components and accessories, refer to
Assembling patient circuits (see page 36).
The Setup Assistant can only be accessed when the Astral device is in Clinical mode.
Note: Using the Setup Assistant will clear the current settings of the active program.
To use the Setup Assistant:
1. Access Clinical mode.
2. From the Main menu press Setup . The Setup menu is displayed.
3. Select Setup Assistant and press Start.
4. A warning message will display. Select Continue.
16