Connecting To Mains Power - ResMed Astral 100 Series User Manual

The Astral device can be used with different power sources:
•
Mains power
•
Astral External battery
•
Internal battery
•
External DC power supply (eg, car 12V power outlet)
•
ResMed Power Station II.
For information on power supplies and sources see the Technical Specifications.

Connecting to mains power

WARNING
Ensure that the power cord does not pose a tripping or choking hazard.
To connect to mains power:
1. Connect the DC plug of the supplied ResMed external power supply unit to the rear of the Astral
device.
2. Before connecting the power cord to the ResMed power supply unit, ensure the end of the
connector of the power cord is correctly aligned with the input socket on the power supply unit.
3. Plug the other end of the power cord into the power outlet.
Note: The power cord is equipped with a push-pull locking connector. To remove, grasp the power cord housing and
gently pull the connector from the device. Do not twist its outer housing or pull on the cord.
Accessories
English 39