Adjusting Patient Settings - ResMed Astral Series Clinical Manual

Using the Astral device
6. To make changes to the patient settings within this mode, refer to Adjusting patient settings (see
page 28).
Note: If the mode change is cancelled you will be returned to the current active mode's primary
settings page. All modifications will be disregarded.

Adjusting patient settings

To adjust patient settings of the current active program:
1. Access Clinical mode.
The Main settings screen will be displayed.
2. Select the setting that you want to adjust. The selected setting is highlighted in orange and the
Settings bar appears on the right side of the screen.
3. Increase or decrease the selected setting as desired.
4. If adjustments to other selected settings are required, select the desired settings and repeat this
process. All settings that have been adjusted are shown with an orange outline.
5. If no further adjustments are required, select Apply.
Review and adjust alarm settings as required. Refer to Adjusting alarm settings (see page 108) for more
information.
28