Honeywell ScanPal EDA61K Series User Manual page 70

•
•
•
•
Configure Proxy Settings for a Wi-Fi Network
If you need to connect to network resources through a proxy server, you can
configure settings for the proxy server for each Wi-Fi network you add. By default,
the Wi-Fi networks you add are not configured to connect through a proxy server.
Note: Proxy settings apply only to the Wi-Fi network you modify. You must change proxy
settings for each network requiring a proxy server.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap
4. Tap
5. Tap Advanced options.
6. Under Proxy, tap None to open menu, and then select Manual.
7. Enter the proxy settings for the network.
8. Tap Save.
Disable Wi-Fi Notifications
By default, when Wi-Fi is enabled, you receive notifications in the Status bar when
the computer discovers a wireless network. You can disable these notifications.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Navigate to the bottom of the discovered network list.
4. Select Wi-Fi preferences.
5. Tap Open network notification to toggle the setting On or Off.
62
The computer automatically connects to the same network when the network is
in range and the WLAN radio is turned On.
To remove a network from your saved list, tap and hold the network name and
select Forget. You can do this for networks you no longer use.
To modify a network from your saved list, tap and hold the network name and
select Modify network. You can do this if you changed your network password.
To view a list of only your saved networks, navigate to the bottom of the
discovered network list. Tap Saved networks.
> Network & internet > Wi-Fi. The list of available Wi-Fi
networks appears.
to the right of the connected network you want to edit.
in the upper right of the app screen.
> Network & internet > Wi-Fi. Verify the WLAN radio is turned
On.
ScanPal EDA61K Mobile Computer