Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ClearSpan SunBurst
Summary of Contents for ClearSpan SunBurst
- Page 1 ClearSpan ™ SunBurst Dome Tents Photo may show a different but similar model. ©2007 ClearSpan™ STK# DIMENSIONS All Rights Reserved. Reproduction is prohibited 106612 10’ W x 10’ L without permission. Revision date: April 2007ldg...
-
Page 2: Safety Precautions
• Never erect the structure under power lines. • Identify whether underground cables and pipes are Thank you for purchasing this ClearSpan™ SunBurst present before preparing the site or anchoring the shelter. When properly assembled and maintained, this structure. product will provide years of reliable service. These instructions include helpful hints and important information •... -
Page 3: Assembly Procedure
These words and phrases are common to most ClearSpan™ shelters and identify the different parts of the shelter. (Some are used in this document. Others may not apply to this particular shelter.) These terms describe the shipped parts and can also be found on the materials list/spec sheets included with the shipment. -
Page 4: Required Tools
For an overview of this shelter and to view diagrams and details, consult the Quick Start Guide located at the back of this instruction packet. Refer to the guide throughout the assembly of this shelter. Visit www.ClearSpan.com for additional products and customer assistance. - Page 5 3. Square the frame and anchor as instructed. 4. Prepare and attach side panels (if equipped) and attach main cover. 103930 4-Way Crown Fitting Hip Rafter Base Rafter 103933 3-Way Corner Coupler Tent Leg Visit www.ClearSpan.com for additional products and customer assistance.
-
Page 6: Frame Assembly
6. Using the supplied Tek screws (FA4482B) and the nut setter (100441), secure each rafter pipe splice as NOTE: Use the 1/4" x 2" carriage bolts and nuts to shown above. secure each assembly to the crown fitting. Visit www.ClearSpan.com for additional products and customer assistance. - Page 7 Some panels may not include 11. Continue by anchoring the tent frame. grommets along the upper or lower edges. 3. Install all side panels and continue with the main cover. Visit www.ClearSpan.com for additional products and customer assistance.
-
Page 8: Main Cover Installation
For replacement or missing parts, call 1-800-245-9881 for assistance. NOTE: With the exception of Truss Arch buildings, ClearSpan™ shelters and greenhouses do not have any tested loading criteria. NOTE: The diagrams above may show a similar application. The cover and frame design may differ from the design of the actual shelter. - Page 9 CLEARSPAN DOME TENTS ™ QUICK START GUIDE 10' Wide SunBurst Dome Tent Frame shown may vary in length from actual frame. Visit www.ClearSpan.com for additional products and customer assistance.
- Page 10 CLEARSPAN DOME TENTS ™ Visit www.ClearSpan.com for additional products and customer assistance.
- Page 11 CLEARSPAN DOME TENTS ™ Visit www.ClearSpan.com for additional products and customer assistance.
- Page 12 CLEARSPAN DOME TENTS ™ Visit www.ClearSpan.com for additional products and customer assistance.
- Page 13 CLEARSPAN DOME TENTS ™ Space below is reserved for customer notes. Visit www.ClearSpan.com for additional products and customer assistance.
Need help?
Do you have a question about the SunBurst and is the answer not in the manual?
Questions and answers