Toshiba B-570 Maintenance Manual page 74

6. DIAG. TEST OPERATION
Set the issue mode type
T Y
Set the label length
L A
Press the [PAUSE] key. (See NOTE 3.)
Set the media feed
P A
Press the [PAUSE] key. (See NOTE 3.)
Press the [PAUSE] key. (Feed one media.)
From B of the preceding page.
P E [ S ] N O
Select the issue mode type from
those at the right by pressing
the [FEED] key or [RESTART]
key. (See NOTE 2.)
Press [PAUSE] key. (See NOTE 3.)
B E L L E N G T H
Select the label length from
those at the right by pressing
the [FEED] key or [RESTART]
key. (See NOTE 6 and 7.)
P E R F E E D
Select the media feed from those
at the right by pressing the
[FEED] key or [RESTART] key.
(See NOTE 2.)
To be continued on
B of the next page.
C U T T I N G
[S] Standard mode
(Batch printing without cut)
[C] Auto-cut mode
(Issue and cutting)
[H] Strip mode
(On-demand printing
without cut)
7 6 m m
999 (Label length 999 mm)
998 (Label length 998 mm)
997 (Label length 997 mm)
7 (Label length 7 mm)
6 (Label length 6 mm)
5 (Label length 5 mm)
PAPER FEED
PAPER NO FEED
6-43
EM18-33010A
6.4 TEST PRINT MODE
Press the [FEED] key
and [RESTART] key
at the same time.
To C of the
preceding page.
Press the [FEED] key
and [RESTART] key
at the same time.
To C of the
preceding page.
Press the [FEED] key
and [RESTART] key
at the same time.
To C of the
preceding page.