5 Installation Procedure
◆
Make Cable Connections to the 24 V Power Supply Option
(PS-V10M)
1. Plug the unit connection cable into the white connector socket CN3-2 labeled "TO
CONTROLLER" on the 24 V Power Supply Option and plug the remaining cable into the
black connector socket CN3-1 labeled "TO POWER BOARD" on the 24 V Power Supply
Option.
Figure 17
Figure 17 Plugging the Connector into the 24 V Power Supply Unit (PS-V10M)
24
(connecting the control board)
YASKAWA ELECTRIC TOBP C730600 27B V1000 Option PS-V10 Installation Manual