Advertisement
Description of the Upgrade
Installation Procedure for the Upgrade
1. To start the Keysight License Manager, press Start > Keysight License
2. Right click the on the desired option and click Delete.
3. In the Select Desired Option list, click 217.
4. In the Keysight License Manager dialog box that appears, press or click
5. A message displays stating that the option removal was successful.
6. Restart the PNA Analyzer application: Press File > Exit.
7. In the Exit NA Application dialog box that opens, press OK.
Step 27. Enable Options 417
Procedure Requirements
For this step, you will need a USB flash drive.
— The analyzer must be powered up and operating to perform this procedure.
— The Network Analyzer program must be running.
— A keyboard and mouse must be connected to the network analyzer.
— Refer to the license message you received from Keysight: Verify that the
— Obtain your license key file(s) for installation of this upgrade by following
Option Enable Procedure
1. Locate the email(s) from Keysight which contain license file attachments.
A single license file may contain licenses for more than one instrument.
2. Copy the license file(s) from the email(s) to the root d irectory of the USB
3. Insert the USB flash drive into the PNA's USB drive slot.
36
Manager > Keysight License Manager . A Keysight License Manager dialog
box will appear.
Yes to confirm delete.
analyzer's model and serial numbers match those on the license message
you received from Keysight.
the instructions on the supplied Software Entitlement Certificate.
These emails are a result of
Information" on page
flash drive.
More than one license file may be copied to the USB flash drive.
"Step 1. Obtain a Keyword and Verify the
14.
Installation Note N5242-90122
Advertisement
