Keysight Technologies PNA-X N5241B Installation Note page 26

To upgrade option 217 to option 417 for analyzers with serial numbers prefixed my/sg/us5201 and above

Hide thumbs Also See for PNA-X N5241B:

Description of the Upgrade

Installation Procedure for the Upgrade

Figure 10

Second Source Boards Installation, Part 1

Install Cable on Source 2 Synthesizer Board

Install gray flex cable W67 (N5242-60030) to connector J5 of the Source 2

Synthesizer board. The loose end of the cable will be connected on the A10

frequency reference board (J7) after the Source 2 Synthesizer board has been

installed in the analyzer.

Installation Note N5242-90122

Table of Contents