Keysight Technologies PNA-X N5241B Installation Note page 21

To upgrade option 217 to option 417 for analyzers with serial numbers prefixed my/sg/us5201 and above

Hide thumbs Also See for PNA-X N5241B:

Description of the Upgrade

Installation Procedure for the Upgrade

Step 11.Assemble the A35 and A36 Source Attenuators and the A43

and A44 Receiver Attenuators

Follow the five instructions shown in

Figure 5

A35, A36 Source Attenuators Assembly and A43, A44 Receiver Attenuators

Assembly

Step 12.Assemble the A29 - A32 Test Port Coupler Assemblies

1. Remove the A29 test port 1 coupler and A32 test port 2 coupler from the

2. If your analyzer's serial number prefix is MY/SG/US5321 and above: Using

Installation Note N5242-90122

PNA. For instructions, click the Chapter 7 bookmark, "Removing and

Replacing the A29 - A32 Test Port Couplers" in the PDF Service Guide

pliers, remove the adhesive bumper on the A29 test port 1 coupler and on

the A32 test port 2 coupler.

1. See

"Downloading the Online PNA Service Guide" on page

Figure

Table of Contents