Mds-10 Detector - Minelab MDS-10 Operation Manual

MDS‑10 Detector
1. Lithium‑ion Rechargeable Battery
2. Battery Release Lever
3. Control Box
4. Lateral Shaft Camlock
5. Adjustable Armrest
6. Armrest Strap
7. User Interface
8. Speaker
9. Trigger Button
10. Folding Handle
11. Stand
12. Earset Connector
13. MD Test Piece
14. Upper Shaft
15. Upper Shaft Camlock
16. Middle Shaft
17. Lower Shaft Camlock
18. Lower Shaft
19. Sensor Head
20. Sensor Head Rotation Camlock
21. Sensor Head Pivot Tension
22. GPR Antennas
23. Metal Detection Coil
Attachment Points
Sturdy attachment points are located near the
front of the control box. These are sized to fit
standard 25mm (1") webbing straps for
attachment to load carrying equipment.
Earset Cable Retention Notches
There are Earset cable retention notches located
on each side of the armrest.
Loop excess Earset cable through to manage
excess cable length, if required.
Stand
The stand can also
be used as a carry
handle.
System Overview | 9