Play/Pause; Pause The Gpr Imagery/Md Trace - Minelab MDS-10 Operation Manual

Play/Pause

The GPR Imagery and/or MD Trace can be paused
if an anomaly of interest is observed. This pauses
the GPR Image and MD Trace (see page 29) so it
can be scrutinised.
It also disables the transmitters for both MD and
GPR Sensors.
Pause the GPR Imagery/MD
Trace
1. Short‑press the Play/Pause button while
detecting.
The Play/Pause button
The imagery will pause, and the Pause/Play
icon will flash on the LCD.
All Sensor Feedback Setting Icons and
Sensitivity Level Indicators will be temporarily
hidden.
The MD and GPR Sensors will be temporarily
disabled.
2. Short‑press the Pause/Play button again to
re‑enable the Sensors and restart GPR imagery
and/or MD Trace generation.
42 | GPR Overview