Setup Screen - Minelab MDS-10 Operation Manual

Setup Screen

Short‑press the Setup button to display the Setup Screen. The example below shows the Setup Screen with
Factory Preset settings.
Parts of the Setup Screen
4
5
9
10
1. Settings Overview Area
Displays the current detector settings. They
cannot be adjusted from the Setup Screen.
2. Setup Menu Icon
3. Battery Level Indicator
Displays the battery level (page 53).
4. MD Sensitivity Level
Displays the MD Sensitivity level (page 35).
5. Volume Level
Displays the Volume level (page 27).
6. GPR Sensitivity Level
Displays the GPR Sensitivity level (page 39).
7. LCD/LED Brightness Level
Displays the LCD/LED Brightness level
(page 24).
8. Default Setting Markers
The Sensitivity, Volume, and
Default
Brightness adjustment bars
setting
display a marker to indicate
marker
the default setting position.
18 | Getting Started
1 2
11 14
3
15 13
9. MD Ground Balance Mode
Displays the current Ground Balance Mode
(page 33).
10. Enabled MD Feedback Indicators
Indicates enabled MD Feedback settings; Visual,
Audio, and Vibration (page 25).
11. MD Setup Page Indicator
12. Enabled GPR Feedback Indicators
Indicates enabled GPR Feedback settings;
Visual, Audio, and Vibration (page 25).
13. GPR Setup Page Indicator
14. Soft Key Options
15. Error Code Display Area
In the event of an MD, GPR, or System Error, an
Error Code will be displayed (page 58).
6
8
7
12
Short‑press the button
directly below each Soft
Key option to select or
toggle the available
options.