Minelab MDS-10 Operation Manual page 17

Parts of the Detect Screen
The example below shows the Detect Screen with Factory Preset settings. By default, Dual Sensor
Mode is enabled, therefore both MD (red) and GPR (yellow) functions and settings are displayed.
1
5
6
7
1. Status Bar
Displays quick‑reference information for the
detector battery level and MD/GPR Sensitivity
settings.
In the event of an Advisory Error, the
Advisory Error icon will appear in the
status bar (page 59).
2. MD Sensitivity Level Indicator
Displays a visual indication of the MD
Sensitivity level (page 35).
3. Battery level Indicator
Displays a visual indication of the battery level
(page 53).
4. GPR Sensitivity Level Indicator
Displays a visual indication of the GPR
Sensitivity level (page 39).
5. MD Ground Balance Mode
Displays the current Ground Balance Mode
(page 33).
2 3
10
4
6. Enabled MD Feedback Indicators
Indicates enabled MD Feedback settings; Visual,
Audio, and Vibration (page 25).
7. MD Trace
Visually represents the responses from metallic
targets (page 29).
8. GPR Imagery
Visually represents buried objects and sub
surface structures (page 43).
9. Enabled GPR Feedback Indicators
Indicates enabled GPR Feedback settings;
Visual, Audio, and Vibration (page 25).
10. Pop‑up Indications Area
Displays the status of MD Ground Balance, MD
Noise Cancel, and GPR Skyshot processes.
In the event of a Critical System Error, an Error
Code and icon will be displayed (page 58).
Indicates when MD Pinpoint and Interrogation
Modes are enabled.
8
9
Getting Started | 17