Table of Contents
Advertisement
R E C I R C U L AT I O N M O D E
, and
If you do not have an outlet to the outside, the exhaust pipe is not required (as shown in the
must be installed.
section "Installation - ducted"), and charcoal filters must be installed.
(CAP61CF)
(CAP61CF)
I N S TA L L I N G T H E C H A R C O A L F I LT E R ( C A P 6 1 C F )
An activated charcoal filter can be used to trap odours. In order to install the charcoal filter, the
grease filter should be detached first. Press the release button and pull it downward as
shown below.
Fit the activated charcoal filter onto the side of the motor and turn it in a clockwise direction to
lock into place. Repeat the same on the other side.
N OT E :
Make sure the filter is securely locked. Otherwise,
it may loosen and be dangerous.
When using a charcoal filter, the extraction power
may be slightly reduced.
We recommend replacing these filters
every 6 months. Replacement filters (CAP61CF)
can be purchased directly
from www.caple.co.uk
8
We recommend replacing these filters every 6 months. Replacement
filters (CAP61CF) can be purchased directly from www.caple.co.uk
14
Instruction manual Zi922
Please keep this instruction manual for future reference
We recommend replacing these filters every 6 months. Replacement
filters (CAP61CF) can be purchased directly from www.caple.co.uk
O P E R A T I O N
O N / O F F B U T TO N
Press and hold for 2-3 seconds to turn the extractor fan on.
You can then change the speeds as per below. Press again to switch off.
L O W S P E E D B U T TO N
Is suitable for simmering and cooking which does not produce much steam or odour.
M E D I U M S P E E D B U T TO N
Airflow speed is ideal for extracting with standard cooking.
H I G H S P E E D B U T TO N
When a high amount of steam or odours are produced, use the high speed setting for the
most effective extraction.
L I G H T B U T TO N
Switches the light on and off.
Please keep this instruction manual for future reference
Instruction manual Zi922
15
Advertisement
Table of Contents
