Download Print this page

Installing The Charcoal Filter - Caple FSCHSS9 Instruction Manual

Conventional hood
Hide thumbs Also See for FSCHSS9:

Advertisement

A I R E X T R A C T I O N S E T T I N G
D U C T E D I N S TA L L AT I O N :
Turn the adjuster to the ducted position, install the outlet, turn on the cooker hood. The air will be
extracted to the outside outlet.

    


    





    



            

R E C I R C U L AT I O N :
The recirculation mode uses a CAP80CF charcoal filter. Turn the adjuster to the indoor position,
                                      The recirculation mode uses a C C A A P P 6 6 2 2 C C F F
install the outlet cover onto the round ducting spigot, turn on the cooker hood, then the air can be
charcoal
vented from the front outlet.
Note: The charcoal filter is mounted on the back of the grill and must
N OT E :
be changed once every 6 months. Replacement CAP62CF charcoal
We recommend the ducting does not exceed 2.5 metres in length, to ensure maximum efficiency.
filters can be purchased directly from www.caple.co.uk.
Warning: the charcoal filter cannot be washed or recycled. It should
be changed at most after 120 hours of use. The charcoal filter
shouldn't be exposed to heat.
To install the filters, simply line up the lugs and push onto the
motor. Then twist to lock and secure to the filters.
12
Instruction manual FSCHSS9
Please keep this instruction manual for future reference
I N S T A L L I N G T H E C H A R C O A L F I LT E R ( C A P 8 0 C F )
The charcoal filter is mounted on the back of the grill and must be changed once every 6 months.
Replacement CAP80CF charcoal filters can be purchased directly from www.caple.co.uk.
WA R N I N G :
the charcoal filter cannot be washed or recycled. It should be changed at most after 120 hours of
use (approximately 6 months). The charcoal filter shouldn't be exposed to heat.
To install the filters, simply line up the lugs and push onto the motor. Then twist to lock and secure
to the filters.
Please keep this instruction manual for future reference
13
Instruction manual FSCHSS9

Advertisement

loading