Ups Specifications - Toshiba 1600EP Series Instruction Manual

UPS Specifications

Unit (Capacity)
general
topology
Certifications
input Characteristics
input Voltage
input Frequency
input Capacity
input power Factor
Current thD (linear load)
included aC input breaker
rating
battery Characteristics
battery type
backup time, fully charged
@ 0.7 power factor, 77 °F
backup time, fully charged
@ 0.85 power factor, 77 °F
recharge time
battery Voltage (nominal)
output Characteristics
output Voltage
output Voltage regulation
output Frequency
aUto/man Frequency
Voltage thD
Common-mode noise
rated load power Factor
Efficiency (ac-dc-ac)
Voltage transient
rated output Current (rms)
max. peak output Current
inverter overload Capacity
bypass overload Capacity
Crest Factor
1. Input/output figures rated for 240 volts. Output ratings given for 0.85PF are only valid when the input voltage is
greater than 204 volts; otherwise, ratings given for 0.70pF are applicable.
2. battery backup time may vary depending on the operating conditions and ambient temperature at the installation site.
3. an initial charge time of 24 hrs. is necessary to obtain proper battery performance level before unit is placed in operation.
1600ep Series instruction manual
STANdArd MOdeLS: 3.6kVA-RoHS; 3.6kVA; 6kVA; 8kVA
3.6 kVa-rohS
(3.1 kw)
1
3.6 kVa
30 a/277 V
Valve regulated lead acid, Flame retardant
8 min.
minimum
2
7 min.
minimum
2
24 hr. (full), 12 hr. (90%) for internal batteries only
144 Vdc
±0.5 hz/1 hz/1.5 hz (factory or authorized service center selectable only)
Factory or authorized service center selectable only
< 3% for linear load; < 6% for non-linear load
15 a
45 a
3.6 kVa (3.1 kw)
1
true on-line
Ul, CUl, iSo 9001, nema/pe1-1993
Single-phase, 208/240 Vac, -30% – +10%
45 – 65 hz (auto-sensing)
> 0.95 for all loads
< 5% total harmonic distortion
14 min.
minimum
2
10 min.
minimum
2
216 Vdc
Single-phase, 240/208/120 V
± 3%
< 0.5 Vrms
0.85 (0.6 – 1.0) lagging
> than 83% (without battery charge)
< ±8% (load of 0 – 100 %)
125% for 30 sec./150% for 10 sec.
125% for 10 min./1000% for 1 cycle
3.0
6 kVa (5.1 kw) 8 kVa (6.8 kw)
1
6.0 kVa
50 a/277 V 60 a/277 V
7 min.
minimum
2
7 min.
minimum
2
3
216 Vdc 288 Vdc
25 a
75 a
1
8.0 kVa
33.3 a
100 a
15