Data Display Screens - Toshiba 1600EP Series Instruction Manual

Data Display Screens

the Data Display screens sequentially display the data parameters
that can be monitored by operator. to enter the series of Data Display
screens, press UP or DOWN arrows while the current System overview
Screen is appearing.
NOTES
1. if the SET/MONITOR key is pressed from any of the Data Display
screens then the display will advance to the Data Setting screens.
See page 33.
2. Displays 240V output voltage.
3. Displays the current as a % of maximum load capacity.
4. Displays the battery charge voltage as a % of the rated nominal
DC voltage of the batteries.
5. Displays the date and time setting.
6. if the SHIFT/SELECT key is pressed from any one of the timer
Start Data, timer Stop Data, weekly Schedule, Special operate,
and Special off time screens then special Data Display screens
are viewed. these functions can only to be changed via the serial
communication interface (see
1600ep Series instruction manual
page 32).
2
inpUt Voltage
###V
inpUt FreQUenCy
##.#hz
oUtpUt Voltage
###V
oUtpUt FreQUenCy
##.#hz
3
oUtpUt CUrrent
##%
4
battery Voltage
##%
batt inStall Date
11/28/2007
battery liFe
remain 4.1 yr
internal temp
## C
5
01/28/2008
10:17
6
timer Start Data
to View: SeleCt
6
timer Stop Data
to View: SeleCt
Cal oper moDe
DiSable
6
weeKly SCheDUle
to View: SeleCt
6
SpeCial operate
to View: SeleCt
6
SpeCial operate
to View: SeleCt
31