External Monitor; Connecting The Monitor Cable - Toshiba PORTEGE R400 User Manual

Features, Utilities and Options

External monitor

An external analog monitor can be connected to the external monitor port
on the computer. To connect a monitor, follow the steps as detailed below:

Connecting the monitor cable

1. Turn the computer's power off.
2. Connect the monitor cable to the external monitor port.
3. Turn the external monitor's power on.
4. Turn the computer's power on.
When you turn on the power, the computer will automatically recognize the
monitor and determine whether it is a color or monochrome device. In the
event that you find that there are issues getting an image displayed on the
correct monitor, you should consider using the Fn + F5 hot key to change
the display settings (if you then disconnect the external monitor before you
turn the computer's power off, be sure to press Fn + F5 hot key again to
switch to the internal display).
Please refer to Chapter 5,
keys to change the display setting.
3-24
External monitor port
Monitor cable
Figure 3-14 Connecting the monitor cable to the external monitor port
The Keyboard, for further details on using hot
User's Manual