Removing The Battery Pack; Installing The Battery Pack - Toshiba PORTEGE R400 User Manual

Removing the battery pack

To remove a discharged battery, follow the steps as detailed below:
1. Save your work.
2. Turn the computer's power off - ensure that the Power indicator is off.
3. Remove all cables and peripherals that are connected to the computer.
4. Close the display panel and turn the computer upside down.
Always make sure the display panel is closed in Laptop mode before
turning the computer upside down.
5. Slide the battery release latch (1) into its (
battery pack and then remove it from the computer (2).

Installing the battery pack

To install a battery pack, follow the steps as detailed below:
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the battery
release latch and cause injuries.
1. Insert the battery pack as far as it will go into the computer (1).
2. Ensure that the battery pack is securely in place (2).
User's Manual
Figure 6-1 Releasing the battery pack
Power and Power-Up Modes
) position to disengage the
Battery release latch
Battery pack
6-11