Toshiba PORTEGE R400 User Manual page 54

Features, Utilities and Options
7. Remove two screws securing the keyboard.
Use a point size 0 Phillips screwdriver.
8. Lift up the back of the keyboard, rotate it toward you and lay in face
down on the palm rest.
■
Never allow metal objects, such as screws, staples and paper clips,
to enter the computer or keyboard. Foreign metal objects can create a
short circuit, which can cause computer damage and fire, possibly
resulting in serious injury.
■
When you move the keyboard forward, do not touch the keys. Doing so
could cause misalignment. Hold the keyboard by the sides and lay it
gently on the palm rest.
■
The keyboard is connected to the computer by a keyboard ribbon
cable. Be careful not to apply tension to this cable when you lift up the
keyboard. Do not try to disconnect this cable.
9. Raise the insulator sheet covering the memory module to appear the
module. And keep the insulation sheet raised using adhesive tape.
3-16
Figure 3-4 Removing two screws and rotate the keyboard
Insulation sheet
Figure 3-5 Raising the insulation sheet
Screws
User's Manual