Wireless communication switch
You can enable or disable Wireless communication functions with the on/off
switch. No transmissions are sent or received when the switch is off. Slide
the switch to the right to turn it on and to the left to turn it off.
Wireless communication Indicator
The wireless communication indicator shows the status of the computer's
wireless communication functions.
Indicator status
Indicator off
Indicator glows
If you used the Task Bar to disable the wireless LAN, restart the computer
or perform the following procedure to re-enable it: Start, Control Panel,
System and Maintenance, System, Device Manager, Network
adapters, Intel
enable.
LAN
The computer has built-in support for Ethernet LAN (10 megabits per
second, 10BASE-T), Fast Ethernet LAN (100 megabits per second,
100BASE-TX) and Gigabit Ethernet LAN (1000 megabits per second,
1000BASE-T).
This section describes how to connect/disconnect to a LAN.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
■
The Wake-up on LAN function consumes power even when the system
is off. Leave the AC adaptor connected while using this feature.
■
The Link speed (10/100/1000 megabits per second) changes
automatically depending on the network conditions (connected device,
cable or noise and so on).
User's Manual
Indication
The wireless communication switch is off - no
wireless functionality is available.
Wireless communication switch is on. Wireless
LAN or Bluetooth is turned on by an application.
®
PRO/Wireless 3945ABG Network Connection and
Operating Basics
4-25