Operating Basics
Moving the computer
While the computer is designed for rugged durability you should exercise a
few simple precautions when moving it in order to help ensure trouble-free
operation.
■
Before moving the computer, it is recommended that you change the
setting associated with the Hard Disk Drive Protection feature. Please
refer to the section,
chapter for further information.
■
Make sure all disk/disc activity has ended before moving the computer -
check that the HDD and other indicators on the front of the computer
are off.
■
Turn off (shut down) the computer.
■
Disconnect the AC adaptor and all peripherals before moving the
computer.
■
Close the display panel.
■
Do not pick up the computer by its display panel.
■
Before carrying your computer, shut it down, disconnect the AC adaptor
and allow it to cool down - a failure to follow this instruction may result in
minor heat injury.
■
The Power Button Lock Switch is set to the 'Lock' position before you
move the computer.
■
Be careful not to subject the computer to impact or shock - a failure to
follow this instruction could result in damage to computer, computer
failure or loss of data.
■
Never transport your computer with any PC Cards installed - this may
cause damage to either the computer and/or the PC Card resulting in
product failure.
■
Always use a suitable carry case when transporting the computer.
■
When carrying your computer, be sure to hold it securely so that it does
not fall or hit anything.
■
Do not carry your computer by holding any of its protruding elements.
4-28
Using the Hard Disk Drive (HDD)
Protection, in this
User's Manual