RGBlink X14 User Manual page 28

Output Setting
1. Click any output port in blue area, the board where the port locates is selected. Users can do
settings to the board now.
A red rectangle flashes around the chosen port when it is clicked.
After DVI or HDMI board is selected, users can do the following settings in the edit section after
clicking icon: Resolution Setting, Test Pattern DE Setting OSD Setting.
Resolution Setting
Output Switch: Slide to On or OFF
Format Range: select ALL or Module；
Format Type:Standard /Customize
Format: when Format Range is All, 49 types of standard format from 720×480@60i to
7680×1080@60, when Format Range is Module, 32 types of standard format from 720×480@60i
to 2560×816@60.
Choose Customize, width, Height, Refresh Rate have to be put in by users manually.
X14 User Manual
27