ComAp IG-NT GC Reference Manual page 162

Related FW 3.0
Description Actual
Value: Res rel
Group Power management
Units %
Related FW 3.0
Description Actual
#%LdResStrt from the currently selected
Value: ResStp rel
Group Power management
Units %
Related FW 3.0
Description Actual
started gen-set (the gen-set with the highest priority) is stopped. This value
contains the following:
[Nominal power of gen-set which is next to be stopped + ((%LdResStp/100) * Sum
of nominal powers of gen-sets loaded in power management except the one
which is next to be stopped)]/(Sum of nominal powers of gen-sets loaded in power
management).
#%LdResStop is used from the currently selected
Value: MinR PWR
Group Power management
Units kW
Related FW 3.0
Description Currently active
running power function is disabled.
Group: Sync/Load ctrl
Value: ActPwrReq
Group Sync/Load ctrl
Units kW
Related FW 3.0
Description This value contains actual required load level, which is used as the input into the
load regulation loop in the parallel to mains operation.
IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
relative reserve.
relative reserve for start. This value contains a copy of the setpoint
relative reserve - when the relative reserve is higher than this value the last
Minimal Running Power
reserve set.
reserve set.
level. If the value contains 0 the minimal
162