Table Of Values - ComAp IG-NT GC Reference Manual

Setpoint: #Date
Group Date/Time
Range [units] [dd.mm.yyyy]
Related FW 3.0
Description The setpoint shows the date from the internal RTC clock of the controller and can
be also used to readjust it.
N
OTE
If the controller is connected to other controllers via the CAN2 bus, the setpoints
#Time and #Date are automatically synchronized each hour with the controller
that has lowest address. If date/time is changed at one controller it is
automatically updated also in all other controllers in the group.
N
OTE
Setpoint with the symbol # are synchronized between controllers.

Table of values

Group: Bank values
Value: Bank nom act
Group Bank values
Units kW
Related FW 3.0
Description Actual nominal power of the bank.
Value: Bank nom
Group Bank values
Units kW
Related FW 3.0
Description Actual nominal power of the bank.
Value: Bank power
Group Bank values
Units kW
Related FW 3.0
Description Actual nominal power of the bank.
Value: Act power
Group Bank values
Units kW
Related FW 3.0
Description Generator total active power.
IGS-NT-BC, SW Version 1.2.0, ©ComAp – January 2019
IGS-NT-BC-1.2.0 Reference Guide.PDF
:
:
151