Appendix; Status Signals Of The Transducer Blocks Including Xd_Error Und Xd_Errext Error Variable - AUMA AUMATIC AC 01.2 Manual

Appendix

6. Appendix
6.1.

Status signals of the transducer blocks including XD_ERROR und XD_ERREXT error variable

coding
Trans- Parameters
ducer
PTB PRIMARY_VALUE_ACTUAL_POSI-
TION.Status =
DITB PRIMARY_VALUE_x.Status =
AITB PRIMARY_VALUE_x.Status =
PTB PRIMARY_VALUE_ACTUAL_POSI-
TION.Status =
DITB PRIMARY_VALUE_x.Status =
AITB PRIMARY_VALUE_x.Status =
PTB PRIMARY_VALUE_ACTUAL_POSI-
TION.Status =
PTB FINAL_VALUE_x.Status =
DITB PRIMARY_VALUE_x.Status =
AITB PRIMARY_VALUE_x.Status =
PTB PRIMARY_VALUE_ACTUAL_POSI-
TION.Status =
AITB PRIMARY_VALUE_x.Status =
PTB PRIMARY_VALUE_ACTUAL_POSI-
TION.Status =
AITB PRIMARY_VALUE_x.Status =
AITB PRIMARY_VALUE_x.Status =
PTB PRIMARY_VALUE_ACTUAL_POSI-
TION.Status =
PTB PRIMARY_VALUE_ACTUAL_POSI-
TION.Status =
PTB PRIMARY_VALUE_ACTUAL_POSI-
TION.Status =
48
Value XD_ERROR
Bad / Device Electronics
Failure failure
0x14 hex
Bad / Device
20 dec
Failure
Bad / Device
Failure
Bad / Device Configuration
Failure error
0x13 hex
Bad / Device
19 dec
Failure
Bad / Device
Failure
Bad / Device Electronics
Failure failure
0x14 hex
Bad / Device
20 dec
Failure
Bad / Device
Failure
Bad / Device
Failure
Bad / Sensor Electronics
Failure failure
0x14 hex
Bad / Sensor
20 dec
Failure
Bad / Sensor Calibration er-
Failure ror
0x12 hex
Bad / Sensor
18 dec
Failure
Bad / Sensor No error
Failure 0x00 hex
0 dec
Good_Cas- General error
cade / Local 0x11 hex
Override 17 dec
Good_Cas- General error
cade / Local 0x11 hex
Override 17 dec
Good_Cas- General error
cade / Local 0x11 hex
Override 17 dec
AC 01.2/ACExC 01.2 Foundation Fieldbus
XD_ERROR_EXT Possible display indica-
tions or causes
Device fault Internal error
0x40000000 hex
1073741824 dec
Configuration er- Configuration error
ror
0x00002000 hex
8192 dec
Device lost FF module cannot access
0x80000000 hex the process data of the
2147483648 dec AC .2 (internal connection
between FF module and
FF sub-assembly or FF
sub-assembly and logic
not available).
Feedback E2 loss Wrn sign.loss act.pos. for
0x00010000 hex AITB only for setting the
65536 dec AITB.CFG_AIN_x = Actu-
al position parameter
Calibration Wrn sign.loss act.pos.,
0x00001000 hex Wrn ref.actual position.
4096 dec For AITB only for setting
the AITB.CFG_AIN_x =
Actual position parameter
No error Wrn input AIN 1, Wrn in-
0x00000000 hex put AIN 2, only for setting
0 dec the AITB.CFG_AIN_x =
Analogue input 1 or Ana-
logue input 2 parameter
Loss of phase Phase failure, Incorrect
0x00000100 hex phase seq, Mains quality
256 dec
Thermal fault Thermal fault
0x00000200 hex
512 dec
Torque fault Torque fault OPEN
OPEN
0x00000001 hex
1 dec
Actuator controls