Table of Contents
Advertisement
2.6.
RL2-MMI3G-Q3
Disconnect the 16pin connector of the factory harness at the rear-side of the climate
control unit and connect it to the 16-pin connector of the 16pin PNP harness.
Connect the opposite 16-pin connector of the 16-pin PNP harness to the climate
control unit's previously become free 16-pin connector.
Connect the red and the brown wire according to the diagrams above to the 40-pin-
or 52-pin Quadlock connector of the factory harness.
Version 06.03.2020
– Connection to the climate control panel and head-unit
HW CAM(V31),(V22)
RL2-MMI3G-Q3/GW
Advertisement
Table of Contents
