Operating Instructions For Misting Mode - Kärcher HD 2.0/1000 Service Manual

OPERATING INSTRUCTIONS FOR MISTING MODE

STEP 1: Attach ½" hose to a disin-
fectant bucket. Avoid excesive water
columns (more that 19") formed by
the supply hose and the bucket.
We recommend Vital Oxide disin-
fectant.
Safety
Latch
High
Pressure Hose
STEP 4: Attach the high pressure
hose to the spray gun.
STEP 7: Start up the machine.
STEP 10: Open metering valve for
Misting mode.
CAUTION: If valve stays close in
misting mode nozzle may get
6
damage
>19"
Pump
Water Inlet
STEP 2: Connect ½: hose to pump
Water inlet. Inspect inlets.
CAUTION: Do not run the pump
without water or pump damage
will result.
Spray
Gun
STEP 5: Connect to apropriate
power supply. Push reset button
on GFCI.
STEP 8: Purge any air trapped in
hose (Recommend to do this over
the disinfectant bucket).
STEP 11: Ready to use, mist Vital
Oxide disinfectant.
9.808-246.0-A • Dual Mister Service Manual
Pressure
Garden Hose
STEP 3: Connect ¼" high pressure
hose to the discharge nipple. Push
coupler collar forward until secure.
STEP 6: Close metering valve to
purge hose.
STEP 9: Atach misting nozzle into
the spray gun.
Discharge
High
Hose
Coupler Collar
Nipple