1. Manuals
  2. Brands
  3. Creative Playthings Manuals
  4. Play Sets & Playground Equipment
  5. NORTHBRIDGE WOOD ROOF
  6. User & assembly manual

Creative Playthings NORTHBRIDGE WOOD ROOF User & Assembly Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
NORTHBRIDGE WOOD ROOF
ASSEMBLY MANUAL
All hardware on this set is specially coated
for corrosion resistance.
If non-Creative Playthings hardware is used,
it must be galvanized or stainless steel.
This product is intended for single
family home/residential use only and
not intended for use in any public
setting. Placement in any public
setting constitutes a misuse of this
product.
Creative Playthings
Please read the owner's manual before the
You must carefully read the entire instruction
Creative Playthings takes great care to design
assembly of your play set. It provides
additional information on the care and use of
your play set.
manual before proceeding with the assembly
or use of your new Playset.
its products with your child's safety in mind.
However, only with careful supervision
and proper safety instructions, can you be
assured of safe play time on any product
designed for children.
®

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NORTHBRIDGE WOOD ROOF and is the answer not in the manual?

Questions and answers

Related Manuals for Creative Playthings NORTHBRIDGE WOOD ROOF

Summary of Contents for Creative Playthings NORTHBRIDGE WOOD ROOF

  • Page 1 Playset. This product is intended for single Creative Playthings takes great care to design family home/residential use only and its products with your child’s safety in mind. not intended for use in any public However, only with careful supervision setting.

  • Page 2: Assembly Safety

    • Until assembly is complete, DO NOT let your children use the Play Set. • Never fasten anything not approved by Creative Playthings to your Play Set. Accessories or items not ap- proved by Creative Playthings include; Dog runs, clothes lines, electrical devices, or bird feeders etc.

  • Page 3: Safe Play Area

    (2 M) (2 M) Whichever is greater Landscape Timbers 6' from (2 M) play structure. A FALL ONTO A HARD SURFACE COULD RESULT IN SERIOUS INJURY. NORTHBRIDGE WOOD ROOF Page 3 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)
  • Page 4 1/4 x 1-1/2" Lag Screw Hex Bolt 3/8 x 6" 3/8 x 5-1/2" Lag Screw 1/4 x 1-1/2" Hex Bolt 3/8 x 8" Lag Screw Truncated to fit on page NORTHBRIDGE WOOD ROOF Page 4 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)

  • Page 5: Hardware Bags

    17001-103 Weld Nut 3/8" CREATIVE PLAYTHINGS PLAY SETS USE A FEW STANDARD CONNECTIONS. BECOME FAMILIAR WITH THESE CONNECTIONS TO EASE ASSEMBLY AND ENSURE A SAFER PLAY PRODUCT FOR YOUR CHILDREN. Hex Bolt & Weld Nut Assembly Procedure: Assembly Layout: Align the holes in the parts to be fastened.
  • Page 6 PLAYSET VIEW NORTHBRIDGE WOOD ROOF Page 6 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)

  • Page 7: Component View

    COMPONENT VIEW Take inventory of all parts, making sure nothing is missing or defective. If you find that parts are missing or defective call the Creative Playthings Customer Service Department at 1-800-598-4997. * Not visible in illustration on Page 6 35246-102 Rock Board 5/4 x 6 x 27-1/4"...

  • Page 8: Maintenance Instructions

    • Check structure twice monthly during usage for any evidence of deterioration. If upon inspection, hardware has sharp edges, rusted or structural pieces have signs of premature failure; replace them through Creative Playthings Customer Service. • Oil all metallic moving parts monthly during the usage season.
  • Page 9 Tent Roof Version * Note: a Hex Bolt Assembly consists of one Hex Bolt passing through one Lock Washer and one Flat Washer, threaded into one Weld Nut. NORTHBRIDGE WOOD ROOF Page 9 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)
  • Page 10 Fasten one End Support (AJ) to the front Posts using four 5/16 x 4-1/2" Hex Bolt Assemblies. Repeat with the other End Support at the back of the tower. NORTHBRIDGE WOOD ROOF Page 10 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)
  • Page 11 Fasten the Step Leg to the back Main Beam with 3/8 x 4-1/2" Hex Bolt Assemblies using the Weld Nuts in- serted previously. i d e t h e NORTHBRIDGE WOOD ROOF Page 11 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)
  • Page 12 Fasten the Leg to the back Main Beam with t h e 3/8 x 4-1/2" Hex Bolt Assemblies using the i d e Weld Nuts inserted previously. f t S NORTHBRIDGE WOOD ROOF Page 12 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)
  • Page 13 STEP 13 – Lift Upright: With the help of others, gently lift the assembly upright onto its legs. Move the tower to the final placement. f t h NORTHBRIDGE WOOD ROOF Page 13 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)
  • Page 14 Side Support to the Leg. Tighten all fasteners. Repeat with the other Side Support on the other side of the gym. 5/16 x 3" Hex Bolt NORTHBRIDGE WOOD ROOF Page 14 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)
  • Page 15 Place one Rung Collar (Z) over each end of all five Rungs (Y). Insert the Rung Assemblies into the holes in the Rung Leg. t h e NORTHBRIDGE WOOD ROOF Page 15 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)
  • Page 16 Washer in each end. The wide surface of the Stringer should be flush with the top of the Platform Ends. t h e Parts omitted 5/16 x 4" Lag Screw for clarity. NORTHBRIDGE WOOD ROOF Page 16 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)
  • Page 17 Rock, and not protrude more than a 1/8" past the end of the weld nut. Protruding bolts can be a hazard to users, replace any protruding bolts. 1/4 x 1-1/2" Hex Bolt NORTHBRIDGE WOOD ROOF Page 17 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)
  • Page 18 Roof Panel and fasten it in place using 1/8" pilot holes and #8 x 1-5/8" Screws as with the other Rafters. Create the second Roof Panel in the same way. NORTHBRIDGE WOOD ROOF Page 18 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)
  • Page 19 Install the Swing Beam as instructed by the assembly guide included with the Beam. Back of tented gym is 1-1/2" shown; wood roof gym Main Beam is similar. NORTHBRIDGE WOOD ROOF Page 19 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)
  • Page 20 Leg and Rung Support. The top of the Ladder Slat should be up against the bottom of the Platform End. Secure the Ladder Slat using four #8 x 1-5/8" Screws. #8 x 1-5/8" Screw NORTHBRIDGE WOOD ROOF Page 20 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)
  • Page 21 Slat to the front End Support and the front Main Beam using " Slats 3 / 4 four #8 x 1-5/8" Screws. The gap will be approximately 2-3/4" i c a t y p between slats. NORTHBRIDGE WOOD ROOF Page 21 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)
  • Page 22 Save all instructions and receipts in case it becomes necessary to contact Creative Play- things for warranty service and/or part replacement. The warranty can be found in your Owner’s Manual. NORTHBRIDGE WOOD ROOF Page 22 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)
  • Page 23 Assembly ASSEMBLY INSTRUCTIONS NORTHBRIDGE WOOD ROOF Page 23 © Copyright 2016, Creative Playthings 19950-100 Rev C (05-18)

Table of Contents