Battery - HP 470 G7 Maintenance And Service Manual

Battery

Table 6-2 Battery description and part number
Description
Battery (3 cell, 41 Wr)
Before removing the battery, follow these steps:
1. Prepare the computer for disassembly
2. Remove the optical drive (see
3. Remove the bottom cover (see
Remove the battery:
1. Remove the four Phillips M2.0 × 3.0 screws (1) that secure the battery to the computer.
2. Remove the battery from the computer (2).
Reverse this procedure to install the battery.
When installing the battery, be sure to install screws in the proper locations. The following image shows the
locations around the battery that have holes but do not require screws.
(Preparation for disassembly on page
Optical drive (select products only) on page
Bottom cover on page 29).
Spare part number
L11119-855
25).
26).
Component replacement procedures 31