Optical Drive Board (Select Products Only) - HP 470 G7 Maintenance And Service Manual

Optical drive board (select products only)

Table 6-10 Optical drive board description and part number
Description
Optical drive board
Optical drive board cable
Before removing the optical drive board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the optical drive (see
3. Remove the bottom cover (see
4. Remove the battery (see
Remove the optical drive board:
1. Disconnect the cable from the ZIF connector on the optical drive board (1).
2. Remove the two Phillips M2.0 × 3.0 screws (2), and then remove the board from the computer (3).
Reverse this procedure to replace the optical drive board.
(Preparation for disassembly on page
Optical drive (select products only) on page
Bottom cover on page
Battery on page 31).
25).
26).
29).
Component replacement procedures
Spare part number
L22540-001
L22524-001
43