System Board Hook - HP 470 G7 Maintenance And Service Manual

System board hook

Table 6-8 System board hook description and part number
Description
System board hook
Before removing the system board hook, follow these steps:
1. Prepare the computer for disassembly
2. Remove the optical drive (see
3. Remove the bottom cover (see
4. Remove the battery (see
Remove the system board hook:
1. Remove the Phillips M2.0 × 3.0 screw (1) that secures the hook to the computer.
2. Remove the system board hook from the computer (2).
Reverse this procedure to install the system board hook.
(Preparation for disassembly on page
Optical drive (select products only) on page
Bottom cover on page
Battery on page 31).
25).
26).
29).
Component replacement procedures
Spare part number
L22748-001
41