Emerson Rosemount 928 Reference Manual page 82

Configuration
September 2019
2.9.3 Configuring device information
Configure device information using Field Communicator
Procedure
1. On the Manual Setup screen, select Device Information.
2. On the Device Information screen, select any of the following and configure as
82
needed.
• Long tag: Enter an identifier for the device up to 32 characters long using the
virtual keypad. The Long tag field is blank by default and does not display if left
blank.
• Tag: Enter an identifier for the device up to eight uppercase alphabetic and
numeric characters long using the virtual keypad. The Tag field is left blank by
default and does not display if left blank.
Reference Manual
00809-0100-4928
Emerson.com/Rosemount