Emerson Rosemount 928 Reference Manual page 16

Configuration
September 2019
2. Do one of the following:
3. When finished, select Send to implement configuration changes.
4. When configuration is completed, remove the HART communications leads from
2.5.2 Bench configure AMS Wireless Configurator
AMS Wireless Configurator is capable of connecting to devices directly, using a HART
modem, or though a Wireless Gateway.
Procedure
1. In the AMS Device Manager pane, select the HART modem.
2. In the device pane, double-click the device icon.
3. Select Configure.
16
On the Configure screen, select Guided Setup to verify or change initial
•
configuration settings. Refer to
subsections for each configuration task.
On the Configure screen, select Manual Setup to verify or change all
•
configuration settings, including optional advanced settings. Refer to
setup. Refer to the Field Communicator subsections for each configuration task.
the COMM terminals on the terminal block and replace the rear housing cover.
Guided setup. Refer to the Field Communicator
Reference Manual
00809-0100-4928
Manual
®
Emerson.com/Rosemount