International; China; Japan - Emerson Rosemount 928 Reference Manual

Product certifications
September 2019
B.9

International

I7 IECEx Intrinsically Safe (IS)
Certificate
Standards
Markings
Refer to
Special Conditions for Safe Use (X):
1. Under extreme circumstances, the non-metallic parts incorporated in the enclosure
2. The transmitter may contain more than 10 percent aluminum and is considered a
3. The equipment shall be powered by Emerson 701PBKKF. An alternative power
4. Only the 375, 475, or AMS Trex Communicators may be used with the Rosemount
B.10

China

I3 NEPSI Intrinsically Safe (IS)
Certificate
Standards
Markings
Special Conditions for Safe Use (X):
See certificate.
B.11

Japan

CML Intrinsically Safe (IS)
Certificate
Standards
190
IECEx SIR 17.0091X
IEC 60079-0:2011, IEC 60079-11:2011
Ex ia IIC T4 Ga;
T4 (-40 °C ≤ Ta ≤ +50 °C)
Type IP66
Table B-1 and Table B-2.
of this equipment may generate an ignition-capable level of electrostatic charge.
Therefore, the equipment shall not be installed in a location where the external
conditions are conducive to the build-up of electrostatic charge on such surfaces. In
addition, the equipment shall only be cleaned with a damp cloth.
potential risk ignition by impact or friction. Care must be taken into account during
installation and use to prevent impact or friction.
source shall be the the CSI MHM-89004, as these devices have output parameters
that are equal or less onerous than the parameters of the 701PBKKF.
928.
GYJ18.1438X
GB 3836.1-2010, GB 3836.4-2010, GB 3836.20-2010
Ex ia IIC T4 Ga (Ta= -40 °C to +50 °C)
CML 18JPN2345X
IEC 60079-0:2011, IEC 60079-11:2011
Reference Manual
00809-0100-4928
Emerson.com/Rosemount