Emerson Rosemount 928 Reference Manual page 203

Reference Manual
00809-0100-4928
Table D-4: Maintenance Alerts (M)
Message
Capacity Denied
(1) Location of the alert in the HART command 48 Status field
Table D-5: Advisory Alerts (A)
Message
Database Storage Error
Configuration Warning
Sensor has Exceeded Limits
Local Alarm Output Active
Module Type Change
HI-HI Alarm
HI Alarm
LO Alarm
LO-LO Alarm
Simulation Active
(1) Location of the alert in the HART command 48 Status field.
Rosemount 928
(continued)
(1)
Additional status
Byte 12 :: Bit 0
(1)
Additional status
Byte 0 :: Bit 2
Byte 2 :: Bit 1
Byte 3 :: Bit 4
Byte 3 :: Bit 3
Byte 4 :: Bit 5
Byte 5 :: Bit 4
Byte 5 :: Bit 5
Byte 5 :: Bit 6
Byte 5 :: Bit 7
Byte 8 :: Bit 0
Alert message mapping
September 2019
Description
The device has failed to acquire
the wireless communication
bandwidth required for the
configured update rate.
Description
The device has failed to write to
the database memory. Any
data written during this time
may have been lost.
A user configuration is corrupt
and has reverted to a default
value.
The measured gas
concentration level is beyond
the range supported by the gas
sensor.
The gas concentration
measured by this device has
exceeded the local alarm limit.
The local alarm output (if
equipped) is now active.
The installed gas sensor
module was replaced, but is
different from the type or
range previously configured.
A device variable value has
surpassed the user-defined
limit.
A device variable value has
surpassed the user-defined
limit.
A device variable value has
surpassed the user-defined
limit.
A device variable value has
surpassed the user-defined
limit.
The device is in simulation
mode and may not be
reporting actual information.
203