Memory expansion
Refer also to Chapter 8, Optional Devices, for information on installing memory
modules.
Problem
Beep sounds.
(If slot A two beeps,
If slot B three beeps,
If both two and three
beeps)
LAN
Problem
Cannot access LAN
Hardware and system checklist
Procedure
Make sure the memory module installed in the
expansion slot is compatible with the computer.
If an incompatible module has been installed,
follow the steps below.
1. Disconnect the AC adaptor and all periph-
eral devices.
2. Remove the battery pack.
3. Remove the memory module.
4. Replace the battery pack and/or connect the
AC adaptor.
5. Turn on the power.
If problems persist, contact your dealer.
Procedure
Check for a firm cable connection between the
LAN jack and the LAN HUB.
If problems persist, consult your LAN
administrator.
9-23