Pointing Devices - Toshiba TE2000 User Manual

User's Manual
Parallel/Printer
This tab lets you set the Printer Port Type. Use the Windows Device Manager to
make settings for the Parallel port.
Parallel Port Mode
The options in this tab are ECP and Standard Bi-directional.
ECP
Standard
Bi-directional

Pointing Devices

Pointing Devices
This tab lets you select Auto-Selected and Simultaneous.
Auto-Selected
Simultaneous
Display
This tab lets you customize your computer's display settings for either the internal
LCD screen or for an external monitor.
Power On Display
Lets you set the display to be used when the computer is booted.
Auto-Selected
Simultaneous
7-6
Sets the port type to Extended Capabilities Port (ECP). For
most printers, the port should be set to ECP. (Default)
This setting should be used with some other parallel
devices.
If a PS/2 mouse is connected to the computer when you
turn on the power, the PS/2 mouse is enabled and the
AccuPoint II is disabled. Otherwise, the AccuPoint II is
enabled. (Default)
Enables both the AccuPoint II and a PS/2 mouse.
Selects an external monitor if one is connected.
Otherwise, it selects the internal LCD. (Default)
Selects both the internal LCD and external monitor for
simultaneous display.