Toshiba TE2000 User Manual page 154

2. The following menu will be displayed:
Select Boot Device
[C]: CD-ROM
[N]: Network (LAN)
[U]: USB Floppy Drive
[1]: Primary Hard Drive (Built-in)
[2]: Secondary Hard Drive (Select Bay)
[P]: PC Card Drive Hard Drive
[D]: Default SYSTEM SETUP Device
Press [C], [N], [U], [1], [2], [P] or [D]
NOTES: 1. If a supervisor password is set, the menu above does not
appear when you use the user password to start the
computer.
2. In this computer, CD refers to the DVD-ROM, CD-R/RW or
CD-RW/DVD-ROM drives.
Press the key (C, N, U, 1, 2, P or D) corresponding to the desired device.
NOTES: 1. The selection method above does not change the boot
priority settings in HW Setup.
2. If you press a key other than one of those above or if the
selected device is not installed, the system will boot according
to the current setting in HW Setup.
HDD Priority Options
This option lets you set the boot priority for the HDD if more than one is installed in
the computer.
Built-in HDD -> Second HDD
Second HDD -> Built-in HDD
The built-in HDD is checked first for the
boot command, then the HDD installed
in the Slim Select Bay. (Default)
The HDD installed in the Slim Select
Bay is checked first for the boot
command, then the built-in HDD.
HW Setup
7-9