Standby Mode - Toshiba TE2000 User Manual

4. Select the Power Save Modes window.
5. Double-click Power Mode (Full Power, Normal, etc.) and open the System
Power Mode window.
6. Enable the desired Hibernation settings for When I press the power button
and When I close the lid.
7. Click the OK button.
Data save in hibernation mode
When you turn off the power in hibernation mode, the computer takes a
moment to save current memory data to the hard disk. During this time, the
Built-in HDD indicator will light.
After you turn off the computer and memory is saved to the hard disk, turn off
the power to any peripheral devices.
CAUTION: Do not turn the computer or devices back on immediately.
Wait a moment to let all capacitors fully discharge.

Standby mode

In standby mode the power remains on, but the CPU and all other devices are
in sleep mode.
CAUTIONS: 1. Before entering Standby mode, be sure to save your data.
Benefits of standby
The standby feature provides the following benefits:
2. Do not install or remove a memory module while the
computer is in standby mode. The computer or the
module could be damaged.
3. Do not remove the battery pack while the computer is in
standby mode (unless the computer is connected to an AC
power source). Data in memory will be lost.
4. If you carry the computer on board an aircraft or into a
hospital, be sure to shut down the computer in hiberna-
tion mode or in shutdown mode to avoid radio signal
interference.
3-11