Using The Internal Modem; Region Selection - Toshiba TE2000 User Manual

User's Manual
Depending on the settings in the TOSHIBA Power Saver utility, the following
four events can trigger a change in the Power Savings settings. To avoid these
automatic changes, clear the Control device power management
checkbox in the Power Saver utility. For details, refer to the Power Saver
utility's help files.
1. You start the computer on battery power.
2. You start the computer with the AC adapter connected and disconnect
the AC adapter during operation.
3. You change the Power Saver settings.
4. The computer resumes operation in suspend or hibernation mode.

Using the internal modem

This section describes how to make settings and connect the modem. Refer to the
computer's online help files for more information. Refer also to the online help files
for your modem software.
NOTE: The internal modem does not support the voice functions
described in the help files. All data and fax functions are supported.
CAUTIONS: 1. In case of a lightning storm, unplug the modem cable

Region selection

Telecommunication regulations vary from one region to another, so you will need to
make sure the internal modem's settings are correct for the region in which it will be
used.
1. a. In Windows
Internal Modem and click Region Select Utility.
NOTE: Do not use the Country/Region Select function in the Modem
setup utility in the Control Panel if the function is available. If you change
the Country/Region in the Control Panel, the change may not take effect.
b. In Windows
Internal Modem and click Region Select Utility.
4-18
from the telephone jack.
2. Do not connect the modem to a digital telephone line.
A digital line will damage the modem.
® XP, click start, point to All Programs, point to TOSHIBA
® 2000, click Start, point to Programs, point to TOSHIBA
Using the internal modem